The annual members assembly of ASSOCOMAPLAST – the Italian trade association belonging to CONFINDUSTRIA, which groups together over 160 makers of machinery, moulds and equip-ment for plastics and rubber – was held on Friday, 19 June at the Science and Technology Mu-seum in Milan. The assembly elected a new President for the two-year term 2015-2017: Alessandro Grassi, managing director of Frigosystem srl, who in turn named Andrea Franceschetti, international sales director for Gefran spa, as Vice President of the association. The members assembly was followed by the public Assocomaplast

December 18th, 20914 (Milan, Italy): Assocomaplast (the Italian trade association, belonging to CONFINDUSTRIA, which groups to-gether some 170 machinery manufacturers) has compared ISTAT foreign trade data for January-September of the current year with data for the same period in 2013 and confirms further growth in both imports and exports. Exports rose by over 4% while purchases from abroad grew by over 7%. This has also led to a consolidation (+3%) of an already strong balance of trade. However, we must underscore that the positive trend in exports, traditional driver for Italian

For the second quarter of 2014, the textile machinery orders index elaborated by the research department at ACIMIT (the Association of Italian Textile Machinery Manufacturers), recorded a 6% increase compared to the previous quarter, for an absolute value of 86 points (basis: 2010=100). (See Graph) This growth in orders came entirely from the foreign markets, for which an increase of 8% was recorded for the period from April to June, with the industry index of 92.1 points. For its part, the domestic market showed a decline in order intake for the second quarter (-9% over the previous quarter)

ASSOCOMAPLAST, tthe Italian trade association belonging to CONFINDUSTRIA, which groups together some 165 makers of machinery, moulds and equipment for plastics and rubber, has produced its 2013 full-year forecast for the industry on the basis of foreign trade data for the first nine months of the year provided by ISTAT, Italy's National Institute of Statistics. The slight dip in exports (-2.8% with respect to January-September 2012) could be recovered in the fourth quarter thanks to the expected economic recovery, early signals of which have been noted recently by the CONFINDUSTRIA Research

The analysis by Assocomaplast, the Italian trade association, belonging to CONFINDUSTRIA, which groups together some 160 manufacturers of plastics and rubber processing machinery) of the latest ISTAT, the Italian National Institute of Statistics, figures for Italian foreign trade shows that, in the first half of 2013, imports in the sector were somewhat weak compared to the same period in 2012 whereas exports held relatively firm, as summarized in Table 1. The downturn in imports is a symptom of a domestic market that still struggles to recover. However, a potentially promising sign, on this

After a still-positive trend in January and February (in the wake of the +5.9% result at the end of 2012), the first quarter of 2013 instead closed with a downturn for Italian exports of plastics and rubber processing machinery, according the Italian National Institute of Statistics - ISTAT figures processed by Assocomaplast (the Italian trade association belonging to CONFINDUSTRIA, which groups together some 165 manufacturers). In fact, foreign sales in this sector fell 4% compared to January-March 2012, set against a 9-point drop in imports. The result is on the whole not surprising, given

Milan, June 18th 2013 – Marco Calcagni (Omet) is the new President of ACIMGA for the two-year period 2013-2014. Elected during the General Member Assembly that took place today in Milan, Calcagni will be flanked by Vice-President Aldo Peretti (Uteco Converting) and by the following offices: Board of Directors Ugo Barzanò, past president (IMS Deltamatic), Silvana Canette past president (Flexotecnica), Felice Rossini past president (Rossini), Daniele Barbui (ACE di Barbui Davide&Figli), Alberto Brivio (BP Agnati), Giovanni Cama (Cason), Alfredo Cerciello (Nordmeccanica), Costanza Cerutti

Assocomaplast (the Italian trade association belonging to CONFINDUSTRIA, which groups together some 165 makers of machinery, molds and equipment for plastics and rubber) has issued its report on the sector's performance in 2012 – based also on the Italian National Institute of Statistics - ISTAT foreign trade statistics. Even more than in the past – and more markedly than in other Italian mechanical equipment sectors – production output was driven by exports, with an upward trend that, despite levelling off over the year, enabled Italian equipment manufacturers offset extremely weak domestic

As global demand increases for Italian Machine Tools, the first ten months of 2012 showed a 14.4% export increase, compared to the same period in 2011 reported UCIMU-SISTEMI PER PRODURRE, Italy's national association for machinery manufacturers in the metalworking sector. Italy's National Institute for Statistics, ISTAT (Istituto Nazionale di Statistica) released that industry had a 2,700 million Euro growth from last year at this time, and UCIMU president Luigi Galdabini reports it is due to the positive performances of Italian manufacturers in foreign markets. China led the export market for

Italian exports of graphic, paper and converting machinery have increased by 4.82% in the first quarter of 2012. Imports are also showing an impressive + 9.94%. Such are the figures published by the Research Center of trade association ACIMGA based on Istat data. The same source reveals that the USA remains the first buyer of Italian machinery with a 68.8 % increase, followed by Germany and China – over the last quarter, the latter has doubled its orders. “We are relieved to see the plus sign in front of these figures, in sharp contrast with the general economic scenario, especially in