EASY TEMPER is an oscillating tempering oven designed for the flat small-sized glass with dimensions from 20x30mm up to 80×100 mm.

Models:

• 35/65 Bed size mm 350x650 (14”x26”)
• 70/100 Bed size mm 700x1000 (28”x40”)
• 100/190 Bed size mm 1000x1900 (40”x75”)
• 100/240 Bed size mm 1000x2400 (40”x95”)

STAR TEMPER is an oscillating tempering oven designed to satisfy the requirements of small and medium sized glass companies while maintaining high production levels and granting maximum simplicity of the setting of the working parameters.Models:

The heating system can be radiant or combined convection and radiation heating systems.

Oscillating tempering oven based on a high pressure blowing system. The special TK convection system allows to temper any LOW-E glass available on the market.

Models:

• 130/300 Bed size mm 1300x3000 (51”x118”)
• 160/360 Bed size dim. mm 1600x3600 (63”x142”)
• 180/360 Bed size dim. mm 1800x3600 (71”x142”)
• 230/360 Bed size dim. mm 2300x3600 (91”x142”)
• 230/450 Bed size dim. mm 2300x4500 (91”x177”)
• 250/360 Bed size dim. mm 2500x3600 (99”x142”)
• 250/450 Bed size dim. mm 2500x4500 (99”x177”)
• 280/500 Bed size dim. mm 2800x5000 (110”x197”)
• 330/600 Bed size dim. mm 3300x6000 (130”x236”)

STRATO® is a thermosetting material: it is significantly different from the PVB film (Polyvinyl butyral), which is a thermoplastic material. The EVA film creates three-dimensional bonds at molecular level during the lamination process. Furthermore, it is not sensitive to humidity and water, therefore it is not necessary to store it under controlled humidity and temperature conditions.

STRATO® is available in different colours and finishings and it is is certified according to European (UNI EN ISO) and American (SGCC - ANSI) standards.

• EXTRA CHIARO

Feature: Thanks to its outstanding clarity STRATO® EXTRA CHIARO allows a very high light transmission but on the other hand it also offers a full protection against UV radiations higher than 99% thus avoiding the fading of interior furnishings. It increases the stability of laminated glass and gives a sense of lightness and transparency to commercial and residential architecture.

• PLUS

Feature: STRATO® PLUS has a higher degree of smoothness and elasticity compared to STRATO® EXTRA CHIARO: this allows the customers to laminate special inserts such as LCD (Smart Glass), PET or fabrics without problems of distortions or air bubbles ensuring, at the same time, the highest degree of transparency even with low temperature lamination.

• LEGGERO

Feature: STRATO® LEGGERO provides a veiled frosted effect (light transmission 60-65%), creating a product that can be integrated into any architectural project without affecting its style.

• SATINATO

Feature: STRATO® SATINATO allows daylight (light transmission 20-25%) to cross naturally through the interiors of residential and commercial buildings, while at the same time safeguarding privacy.

• LATTE

Feature: STRATO® LATTE gives the glass a glossy, semi-opaque effect (light transmission 2%), allowing a glimpse of the shapes of objects. It captures and diffuses the light into the space, without creating reflections.

• BIANCO

Feature: STRATO® BIANCO is the best solution for designers who want to create bright, white, and opaque glass elements (light transmission 0%). STRATO® BIANCO ensures the maximum colour uniformity and UV shielding.

• NERO

Feature: STRATO® NERO can give surprising effects, ensuring a sophisticated and unique touch. It also gives the glass a uniform coverage (light transmission 0%).

• FRESCO

Feature: STRATO® FRESCO is a new generation of high-performance EVA film that uses the nanoparticle technology. It has been formulated to give efficient solar control properties to laminated safety glass compared to clear monolithic glass and conventional clear EVA films. It can replace low-emission glass (Low-E) because it reduces the heat transmission with the advantage of having a no fragile glass to handle: it is a cheaper solution in terms of processing, handling and purchasing.

Multi-level laminating oven for EVA, PVB and SentryGlas with convection heating system. Autoclave free.
It can be combined with HST (Heat Soak Test)

Standard models:

• 18/36 Glass dim. mm 1800x3600 (71"x142")
• 24/36 Glass dim. mm 2400x3600 (94"x142")
• 25/50 Glass dim. mm 2500x5000 (98"x197")

• Possibility of laminating EVA - PVB - SentryGlas without autoclave
• High flow rate hot air circulation heating system
• Rapid cooling system with fresh air circulation
• Maximum temperature uniformity with thermocouple control
• Vacuum circuit with highly efficient oil pumps
• Possibility to adjust the vacuum based on the type of materials

Laminating oven for EVA and SentryGlas with infrared heating system. Available with one or more working surfaces (up to 4) and chambers (up to 2).

Standard models:

• Lamijet 01
• Lamijet 02
• Lamijet 02-2C
• Lamijet 04
• Lamijet 04-2C

• Heaters' supports with ceramic insulators

• Heaters placed above and below the working surface

• Vacuum circuits with high efficient and high capacity oil pumps (one for each working plane) for maximum process efficiency

• Possibility to adjust the vacuum based on the type of materials

• Hydraulic lifting table on request

• Possibility of laminating EVA - PVB – SentryGlas with laminating cycles in less than an hour
• Electric conduction heating system and fast curing
• Maximum temperature uniformity and flexibility
• Temperature control over multiple independent zones
• Temperature regulation with thermocouple connected to a digital microprocessor
• Position photo-cell for automatic glass loading and unloading
• Fast cooling

Standard models:

• CT 75 max. glass dim. mm 600x550 (23”x21”)
• CT 200 max. glass dim. mm 2000x1000 (78”x39)
• CT 240 max. glass dim. mm 2000x1300 (78”x51”)
• CT 320 max. glass dim. mm 3200x2200 (126”x86”)
• CT 360 max. glass dim. mm 4000x2500 (157”x98”)

• Electrical heating
• Touch screen operator’s panel programmable
• Salts melting tank in thick stainless steel
• Energy lack security system - UPS
• Pre-heating hood
• Electromechanical glass lifting system
• Maximum temperature 500°C

Heat Soak Testing oven (HST).

Models:

• 300 Glass dimensions mm 3600x2000 (142”x79”)
• 400 Glass dimensions mm 4000x2000 (157”x79”)
• 450 Glass dimensions mm 4500x2500 (177”x99”)
• 500 Glass dimensions mm 5000x2800 (197”x110”)
• 600 Glass dimensions mm 6000x3300 (236”x130”)

HST oven represents the ideal means to comply with the safety rules concerning the use of tempered glasses.
It prevents spontaneous breakage of tempered glass for excess nickel Sulphur inclusions.