CO.MA.S Srl established in 1978, a member of ACIMGA the Association of the Italian Manufacturers of Machinery for printing and converting, is the ideal partner for the development and the manufacturing of complete lines devoted to the ennobling of papers and plastic films. Moreover, an efficient staff of experts design and produce a wide range of accessories for all types of converting machines; resolving with original, innovative, and custom-designed technical solutions, catering to every single customer's requirements. Thinking, studying, designing and producing a new product involves working 360 degree in the market: this is CO.MA.S's production policy.

For 30 years R&D CO.MA.S. has been developing two business lines. The first, coating plants for the production of adhesive tape, protection tape, masking tape, double sided tape, special tape for electronic and advertising information, and robotized unwinder. The second, expanding shafts, expanding chuck, pneumatic/ mechanic/pneu-mechanic bearings (safety chucks).

The Company Coel Srl (Electro Mechanic Company) was established in 1950 for manufacturing electrical kilns for thermal treatments and artistic ceramics. In that period the company took part, with determinant contribution, to the industry development for tiles and table-ware by making a kiln with a range that would have qualitative results higher than the standard in existence.

In 1967, thanks to the cooperation of a group of technicians specialized in tunnel kilns, Coel expanded its activity in the sanitary ware and brick field by changing its name, at the same time, from Coel to Coel Tunnel. The name of Coel Tunnel became synonymous with guarantee of quality and seriousness. From 1980, following and anticipating the technical innovation requirements (with particular attention to the energy saving and flexibility), kilns with prefabricated structure were built to allow a fast installation.

Coel Tunnel now has a traditional range of tunnel kilns with prefabricated modules, suitable for average and big productions of sanitary ware. Such kilns have low thermal mass, with combustion systems provided with total pre-combustion burners. This system allows the free entrance of combustion gas into the kiln with controlled temperature, since the excess of air for smoke dilution is independent from the combustion air. For each consumption there is an optimal (stoichiometric) combustion air/gas ratio, and the excess of air for dilution is regulated according to the quantity requested, without disturbing the same combustion.

In the last years, Coel Tunnel has started the production of shuttle kilns with cars of big capacity, suitable for firing sanitary ware, table ware, porcelain, bricks, refractories etc., obtaining excellent results regarding the firing times and energy consumption. These fully automatic kilns with a large possibility of changing the firing cycle represent, in the intermittent kiln field, the best you can find in the ceramic firing technology Such kilns can use natural gas, L.P.G. and diesel oil fuels and are also electrically operated for a power of Kw. 2.500 and over. Coel Tunnel's installations in Italy and abroad demonstrate who Coel Tunnel is, and their commitment to success.

Thanks to a unique technical productive experience, which has spanned nearly forty years, a strong commercial presence in Italy, and even stronger in the rest of Europe, India and Japan, COFIT is able to develop effective, consolidated and tested products, as well as technologically important patents;among which, in particular, are those relating to self-cleaning and to the continuous mode of the operating system of the screenchanger.

COFIT has a clear research and development policy as well as specific targets for investments. The company aims at expanding and strengthening the automation process of production procedures in order to achieve maximum control of operations, their further simplification and the reduction of running costs
Furthermore, COFIT research branch aims at the development of technologies which favours energy conservation and the reduction of the environmental impact of the system.
New models of screenchangers are in the process of being developed; these will give our clients a very high level of efficiency even in critical production conditions.

Prodution
Extrusion equipment: screen changers.

Colgar's main plant is located in S. Pietro all'Olmo (Milan) while it's branch is located in Quarto d'Altino (Venice). The company began in 1945 when it started manufacturing metal forming machines, hydraulic and mechanical press brakes, twin press brakes, mechanical and hydraulic guillotine shears equipped with CNC controls, positioning units and accessories for sheet handling and cutting centers with automatic load unload. In 1970 Colgar began manufacturing CNC boring and milling machines with full axes hydrostatic T type configurations and movable column configurations with rotary traverse tables and accessories. In 1999 we became ISO 9001 certified. Colgar is now divided into two areas, each with it's own technical departments. The first is for metal forming machines and the second is for metal cutting machines with relevant separate assembly halls. Colgar is an important supplier for many major national and international companies.

Collari was founded in 1963 by Mario Collari and now is under the management of owner Edore Collari and his sons, Gian Luca and Valeria. All Collari machines are designed for heavy-duty professional use. The farming sector produces rotary tillers, grubbers, subsoilers, normal and combined cultivators with roller hydraulic sections or rear discs, combined grubber + rotary tiller, combined machines for seeding with minimum tillage, stone buriers, with or without seeding, and machines for ground preparation or gardening, nurseries and horticulture. The company is a founding partner of the EUROAGRI consortium.

During the course of the last 30 years, COLMEC has achieved a leading position within the European market for as manufacturers of extrusion lines for rubber compounds. The never ending search for new technology, the attention given to the specific requirements of the customer, innovative proposals, and strict control of our own production processes are just some of the main points on which we at COLMEC have built our reputation and image.

From the first contact, our customers recognise and appreciate our professional and friendly approach to their needs. The sales department of COLMEC is organised in such a way as to always be ready to give a valid and sound answer to any problem the customer may have. A lab extrusion line with a 90 mm

Comaf is a company specializing in the design of solutions and in the application of technologies for the implementation of automated systems. It works based on job orders, from the design of solutions matching the specifications provided by the customer to the implementation of automated systems in industrial production processes. It was founded in 1980 as a workshop specializing in the manufacturing and repair of machines for the brickwork industry. The willpower and commitment with which the company has strived to reinforce its market presence and to achieve full customer satisfaction have resulted in a continuous technical evolution and in the achievement of a high quality level.

For over 25 years Comaf has been manufacturing industrial automation systems, creating functional and innovative solutions, which are environment-friendly and focused on life quality; it has a modern technical department, with qualified staff, for the study and the 3D design (allowing to perform tests before the manufacturing stage) of special machines, comprehensive automatic and semi-automatic systems, possibly with the help of robot systems, as well as of a wide range of solutions for the transportation of the raw materials and/or of the finished pieces. Thanks to its experience and organization Comaf can offer a wide range of services, from the feasibility study to the basic design, from the design to the manufacturing of innovative systems, particularly focusing on alternative and renewable sources for energy recovery from biomasses, as well as on the production of the pellet from the biomasses themselves or from wood.

Comaf has a production workshop of its own, where it manufactures and assembles all the supplied components, which are directly followed in the different stages: installation and preliminary testing at our plant to verify the design specifications, installation at the end customer’s, commissioning and final testing. Their specialized technicians take care of controlling the technical operating parameters of the machines and systems, and of proposing new management procedures.

Founded in 1970, COMEC Italia was the first company to offer printing machines on an industrial scale throughout Italy. Over the course of the last 30 years, COMEC Italia has always proved to be able to meet the needs of the market, producing perfectly designed machines of high quality, versatility and progressing gradually from the production of machines based on mechanical design to more sophisticated electronic, pneumatic and hydraulic equipment, controlled by a micro-processor.

The continuous development has led to the construction of new headquarters covering over 5.000 m2, where our Ink print machines are designed and manufactured.

The high level of professionalism of our technicians and the advanced technology of our equipment enables us to produce printing machines to suit every application.

With the recent introduction of revolutionary hermetically sealed ink-cups system, we can now achieve major savings in color; rapid changeover of clich

Active in the branch since 1943, Comelz became a joint-stock company in 1981 when it moved to a modern new plant. Ever since Comelz specialized in the production of machines for the closing-room, it developed more recently its commercial space with a CAD software for shoe design and with numerically controlled CAM machines for the cutting of fiberboard, insoles, leather and synthetic materials.

Also significant is the presence in the stitching branch with a motor for sewing machines which combine brushless technology with an “intelligent” control unit oriented to automatic sewing units.

With its branch offices, Comelz is commercially present in the most important shoe-factories in industrialized areas. The capability of controlling the employed technologies, designing and manufacturing software, mechanics, electronics and motors, reflects in the great quality and innovation of Comelz products.